Magma PEHIFX1 Manual de usuario descargar pdf (Pagina 3)

Sinar AG/260309/Ca - 3/4 -

5. Installation

Sinar CaptureShop™ 5.6.3 can be installed in parallel to Sinar

CaptureShop™ 4.1.2 and Sinar eXposure™ 6.1.1. These appli-

cations install and use different and the firewire drivers, respec-

tively.

6. Installing the White Reference File of your

Sinarback

In Sinar CaptureShop™ 5 a warning message appears if no

valid Sensor White Reference File for the connected Sinarback is

installed (all Sinarbacks, except all Sinarback eMotion models

and Sinarback eSprit 65 LV). In order to install the White Shad-

ing Reference File from the CD, proceed as follows:

1. Insert White Reference CD

2. Connect your Sinarback to the Macintosh Computer

3. Launch the Sinar CaptureShop ™ 5 application and confirm

the warning message

4. Select "Get White Reference" from the "Capture" menu in

CaptureShop

5. Follow on-screen instructions

When any Sinarback eMotion model is used for the first time

on a specific computer, the Sensor White Reference File is

automatically installed from the internal memory. In case the

automatic installation is not possible, Sinar CaptureShop™ will

ask you to insert the CD containing the White Reference File

matching with the connected digital back. Then follow the in-

structions on the screen.

7. Firmware-Update with Sinarback 54 MC and 54 M

With CaptureShop 5.6.3 the firmware of the Sinarback 54 MC

and 54 M will be updated, if necessary.

To update the firmware, please do the following steps:

1. Connect your Sinarback 54 MC or 54 M with a firewire cable

with the computer.

2. Start Sinar CaptureShop™ version 5.6.3

3. After a few seconds the new firmware will be uploaded on

the connected Sinarback 54 MC / 54 M. The updating process

will take a few minutes. Do not interrupt the connection

while the installation of the firmware is in process!

4. After the complete updating, quit Sinar CaptureShop™

and disconnect the Sinarback 54 MC / 54 M from the

power supply (plug out the firewire cable and the power

supply cable, if present, for a few seconds) so that the new

firmware will be correctly initialized when plugged in again.

8. Sinarback eVolution 75H

With CaptureShop 5.6.3 and Sinarback eVolution 75 H it is

recommended to install the Sinarback eVolution Firmware

version 2.2. A respective updating tool and its ReadMe file is

included on the CD of Sinar CaptureShop™ 5.6.3 and can be

downloaded from our website.

9. Sinar m

When Sinar CaptureShop™ 5.6.3 or higher is used with a Sinar

m that is equipped with an earlier firmware version than 2.0

(see menu Options | Firmware Info) it is strongly recommend to

update the firmware of the Sinar m and of all connected pe-

ripheral items (Mirror module for Nikon lenses, Sinaron Digital

CAB lenses, Adapter plates 100 for Sinarback 54 S/H, SB 44

L/HR, SB 43 S/H, SB 23 L/HR).

When using the "Sinar m DB Aperture Control" or "Sinar m

Lens Extension Rings" Sinar m firmware version 2.10 and higher

is required.

A respective updating tool with version 2.20 and its ReadMe

file is included on the CD of Sinar CaptureShop™ 5.6.3.

Notice: To be able to update the Sinar m firmware with a

Sinarback 54 S/H or SB 43 S/H equipped with a firewire in-

terface the above mentioned Sinarbacks must be featuring

Sinarback firmware version 1.9 and higher.

• A Sinar m firmware update cannot be performed when any

Sinarback eMotion model

is connected.

10. Sinar Hy6

Bi-directional communication between Sinarback and Sinar

Hy6 using CaptureShop 5.6.3 is possible with the follow-

ing Sinarback types: Sinarback eVolution 75 H, Sinarback eMo-

tion 75 LV/ 75, Sinarback eMotion 54 LV, Sinarback eMotion

22, and Sinarback 54 MC/54 M. For the various Sinarback types

the following firmware versions are required:

1. Sinarback eVolution 75H can be operated with the Sinar Hy6

as of Sinar CaptureShop™ 5.6.3 and Sinarback eVolution

Firmware 2.2 or higher.

A respective updating tool and its ReadMe file is included

on the CD of Sinar CaptureShop™ 5.6.3 and can also be

downloaded from our website.

2. Sinarback eMotion can be operated with the Sinar Hy6 as

of Sinar CaptureShop™ 5.6.1 and Sinarback eMotion

Firmware 5.0 or higher (current version is 5.09).

A respective updating tool and its ReadMe file is included

on the CD of Sinar CaptureShop™ 5.6.3 and can also be

downloaded from our website.

3. Sinarback 54 MC/54 M can be operated with the Sinar

Hy6 as of Sinar CaptureShop™ 5.6.1.

A respective firmware update is done automatically when

connecting the back to Sinar CaptureShop™ for the first

time. To have the newly installed firmware initialized, after

completion of the update, quit CaptureShop and discon-

nect the Sinarback 54 MC / M from the power supply –

plug out the firewire cable and the power supply cable, if pre-

sent – and reconnect them after a few seconds.

4. For all Sinarback types listed above we recommend having

Sinar Hy6 Firmware 2.11 or higher installed on your

camera body. In the case of the Sinarback eVolution 75 H,

Sinar Hy6 Firmware 2.09 and higher is required in order to

be able to capture multi-shot images correctly.

If necessary, a firmware update can be performed via USB

cable. A respective updating tool and its ReadMe file is in-

cluded on the CD of Sinar CaptureShop™ 5.6.3 and can also

be downloaded from our website.

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Magma PEHIFX1 Manual de usuario Pagina 3

Comentarios a estos manuales